Quality 4" To 28" Air Grip Union Pneumatic Tire Union API Oilfield Mud Tank Pipe Connector factory
<
Quality 4" To 28" Air Grip Union Pneumatic Tire Union API Oilfield Mud Tank Pipe Connector factory
>

4" To 28" Air Grip Union Pneumatic Tire Union API Oilfield Mud Tank Pipe Connector

Brand Name: Factory-owned Brand
Place of Origin: CHINA
Certification: API, ASEM, etc.
Minimum Order Quantity: Depends on the products

Product Details


Highlight

28" Air Grip Union

,

4" Air Grip Union

,

Oilfield Mud Tank Union

Product Description

1. Product Overview

The Air Grip Union (also known as Pneumatic Tire Union ) is a specialized quick-connect pipe fitting engineered for low-pressure, large-diameter pipeline connections where frequent disassembly and significant pipe misalignment are common. Unlike traditional hammer unions that require precise alignment and hammering, the Air Grip Union uses an inflatable rubber tire (air bag) inside a steel shell. When inflated with compressed air, the tire expands uniformly to create a tight, leak-proof seal around the outer surface of the pipe. When deflated, the seal releases within seconds, allowing instant disconnection.

This design is particularly vital in drilling fluid solid control systems, where mud tanks must be frequently connected and repositioned. Each time mud tanks are moved or reinstalled on site, their relative positions change significantly. The Air Grip Union’s ability to accommodate large misalignment without compromising sealing performance makes it the preferred solution for these demanding applications.

By eliminating the need for precise alignment, heavy tools, and time-consuming bolting, the Air Grip Union significantly reduces worker physical labor and shortens well construction cycles – offering both operational efficiency and cost savings.

 

Key advantages:

Inflatable pneumatic tire creates uniform, reliable seal around pipe

Quick make-up and break-out – inflate/deflate in just 1–3 seconds

Accepts large axial, angular, and lateral misalignment

No tools required – no hammers, bolts, or wrenches

Wide size range from 4″ to 28″ (100mm to 700mm)

Ideal for frequently moved, low-pressure large-diameter lines

2. Technical Specifications

Parameter

Specification

Structure

Steel shell + pneumatic tire (air bag)

Working Medium

Drilling fluid (mud, oil, fresh water, and other acid/alkali media)

Maximum Sealing Pressure

0.4 MPa (approx. 58 PSI)

Working Temperature

-20°C to +120°C

Recovery Time (after deflating)

1 – 3 seconds

Shell Material

Casting steel with anti-corrosion coating

Tire Material

High-quality molded synthetic rubber

Compatible pipe materials:

Fiberglass reinforced plastic (FRP) pipes – corrosion-resistant, lightweight, easy to handle

Rubber hoses with end connections – flexible and suitable for site deployment

Steel pipes

3. Dimensions & Model Numbers)

Our Air Grip Unions are available in a comprehensive range of sizes to meet diverse field requirements. The table below provides detailed model numbers, specifications, and matching pipe diameters:

Item No.

Specifications (inch)

Specifications (mm)

Applicable Pipe O.D. (mm)

Weld Junction Size (mm)

JH-PTU-4

4″

Φ100

Φ114

Φ165

JH-PTU-6

6″

Φ150

Φ168

Φ219

JH-PTU-8

8″

Φ200

Φ219

Φ273

JH-PTU-10

10″

Φ250

Φ273

Φ325

JH-PTU-12

12″

Φ300

Φ325

Φ377

JH-PTU-14

14″

Φ350

Φ377

Φ406

JH-PTU-16

16″

Φ400

Φ406

Φ457

JH-PTU-18

18″

Φ450

Φ457

Φ508

JH-PTU-20

20″

Φ500

Φ508

Φ558

JH-PTU-22

22″

Φ550

Φ558

Φ609

JH-PTU-24

24″

Φ600

Φ609

Φ660

JH-PTU-26

26″

Φ650

Φ660

Φ710

JH-PTU-28

28″

Φ700

Φ710

Φ760

Note: Custom sizes and special end connections available upon request.

4. Applications

The Air Grip Union is specifically designed for low-pressure, large-diameter, frequently dismantled fluid lines in the oil and gas industry, particularly:

Drilling Fluid Solid Control Systems – Primary connections between mud tanks, mud suction lines, and mud return lines in the solids control equipment package

Mud Tank Interconnections – All low-pressure, large-diameter connections between adjacent mud tanks on drilling rigs

Pump Suction Lines – Low-pressure suction sections of centrifugal and charge pumps

Temporary Field Pipelines – Rapidly deployed pipelines for well testing, workover, or emergency repair

Water Transfer Lines – Low-pressure water supply and discharge on rigs and platforms

Waste Fluid & Drainage Systems – Handling drilling waste, spent mud, and drainage fluids

5. Installation & Usage Tips

Pipe Preparation: Ensure the outer surface of the pipe is clean, smooth, and free from sharp edges that may damage the pneumatic tire.

Positioning: Insert the pipe into the union until it reaches the proper depth. The air grip union can accommodate significant misalignment – simply position it as close as possible.

Inflation: Connect an air supply and inflate the tire. The seal will form within 1–3 seconds. Recommended inflation pressure should not exceed the specified maximum.

Connection: Once inflated, the union is securely sealed and ready for fluid transfer.

Disconnection: When disconnecting, simply open the air valve to deflate – the tire will recover to its original shape within 1–3 seconds, allowing easy pipe removal.

Caution: Always ensure the fluid pressure in the pipeline does not exceed the maximum sealing pressure (0.4 MPa). For higher pressure applications, please consult our technical team for alternative solutions.

 

 

Product Highlights

API air grip union for oilfield mud tank connections. Inflatable pneumatic tire seal, 0.4MPa, 4″ to 28″ sizes, quick connect/disconnect, accepts large pipe misalignment. Factory direct with JH-PTU series stock.

Related Products
Quality Continuous Acid Mixing Unit Acid Blending Unit For Fracturing & Stimulation Operations factory

Continuous Acid Mixing Unit Acid Blending Unit For Fracturing & Stimulation Operations

Continuous acid mixing unit for acid fracturing and matrix acidizing. On-demand blending of raw acid, water, and additives. 2,650 gpm (10 m³/min) discharge. Totally enclosed acid mixing system with multiple demisting systems. PTFE and FRP acid-resistant construction.

Quality API 5CT OCTG Oil Tubing Pipe For Oil & Gas Production factory

API 5CT OCTG Oil Tubing Pipe For Oil & Gas Production

Oil tubing pipe is a critical component in oil and gas well completion. After drilling is finished and the well is cased, tubing is run inside the casing to serve as the conduit that transports crude oil and natural gas from the reservoir to the surface. Tubing must withstand the pressures generated ...

Quality Oil Well High Pressure Fracturing Unit High Power Pumping Equipment factory

Oil Well High Pressure Fracturing Unit High Power Pumping Equipment

Fracturing unit (frac pumper) for hydraulic fracturing and well stimulation. 2,000–2,800 hp, up to 20,000 psi, up to 3.85 m³/min. Truck/trailer/skid mount. MTU/CAT/CUMMINS engines, ALLISON/Twin Disc transmissions. Multiple plunger sizes. Intelligent control, remote monitoring.

Quality Truck Mounted Hydration Unit For Fracturing Fluid Preparation factory

Truck Mounted Hydration Unit For Fracturing Fluid Preparation

Hydration unit for hydraulic fracturing fluid preparation. DOTF dry polymer and liquid concentrate systems. 75–100 BPM discharge. Hydration tanks 75–240 bbl. Truck, trailer, or skid mount. Automated control, multiple chemical additives, powder tank 6,600 lb.

Request A Quote

Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.

You can upload up to 5 files and Each file sized 10M max.